Set on a deck chair can have a meal, but to completely relax and enjoy your platform, you can build a chaise longue for the comfort of your case. It can be difficult to achieve with a regular chair, because some moving parts, but the reward makes it worth it compared to the build.
Materials needed to build a chaise longue
Chaise Lounge
Some of the materials needed for this project are the actions of your choice (two of the four, one by one3-1 of 2), an anchor, nails, glue and screws carpentry. The tools you need for this project, a set drill, three-four-five square, hammer, saw, paper and pen, tape measure and a router.
STEPS build your LOUNGE
There are many examples of chairs. If you make a basic living, start recording the type of wood you want. Teak is a good choice if your site is constantly exposed to the elements. Lounges have a substantial amountof pieces that are connected to them. Carefully cut each part separately and then grinding with painting nail polish before applying make everything easier. Start carefully cutting the pieces for your room. The base structure of the lounge is cut a couple of two to four tables of six inches long. The back has a pair of two four-axis cut four inches long.
The cross pieces of wood that you sit back and sit on the needone of two bearings. These pieces should be cut to five 58 cm in length, but can be extended by, if necessary. Share the anchors in the same length and add four inches to the entire width of two to four cards. Repeat the same for the 4-1 with three fields that are installed on the seat and backrest. The width of the pieces are needed to take over the length of the pieces.
To the rear of the hall, carefully cut a couple of one of three pieces. These parts should be designed withHypotenuse of a triangle forty-five degrees, starting from the position of the backrest. Split a pair of one of the two boards to four inches behind the connection of the backrest to the seat frame. Set the router on board at intervals to meet your needs.
The legs of the living room can be done any kind of material. Four-two of the four board carefully cut to length. Share the pair-Lounge is located in desired style. The elbow of the arm shouldare diluted to two inches. Split a pair of vertical supports for the amount expected. Place the screw holes for the connection. Sand all parts to make it adhere well to paint the wood and the problem of unwanted fragments.
To assemble your stay, beginning with the two sides of the frame. Place the pieces on two of four side panels with screws. You can also attach the bolts on the legs of the frame. Install the slats of the seat and the back roomframework to allow the free movement of goods. Mount the frame for the seat and back and place a large hole at the intersection of the back and seat. You can protect the nails that support the pieces back to the seat frame. Connect the supports of the seat back, are the caps.
How to Build a Chaise Lounge
No comments:
Post a Comment